58 Enhanced phone functions
Speaker call to a fixed destination
The system code for "Speaker call-one-way" and the destination number are
programmed on a repdial key
Page 68.
S Press the programmed repdial key. A connection to the destination loudspeaker
is established immediately.
Speaker call in a group
You can also establish a normal connection within a group or team (with team
call = speed-dial numbers 0-9 or 00-99 for team members) via a speaker call.
The speaker call is then initiated by a group telephone.
Speaker call to a variable destination
^ Lift the handset.
or
Speaker Press the key shown for speakerphone mode.
j Enter the system code for "COM group speaker call" (consult your administrator
if necessary).
or
S Press the programmed "COM Group" key.
j Enter the speed-dial number for the corresponding group member.
A connection is immediately established to this destination station's loudspeaker
if
• the station is not busy,
• the handset has not been lifted and
• "Do not disturb" is not activated.
^ The called party accepts the DSS call by lifting the handset.
Speaker
or S If the called party presses the speaker key or the line key (if configured), the
connection is canceled.
Speaker call to a fixed destination
The system code for "COM group speaker call" and the speed-dial number for
the corresponding group member are programmed on a repdial key
Page 68.
S Press the programmed repdial key. A connection to the destination loudspeaker
is established immediately.
^ The called party can accept the call by lifting the handset.
Speaker
or S If the called party presses the speaker key or the line key (if configured), the
connection is canceled.
The "COM group speaker call" function is line-independent – all phones
can call each other via a speaker call.
To Next Page
Loading...
