Unitec Wash Select II User Manual

W A S H S E L E C T I I
Document Number: WS21002 91
Document Title: WSII Operations Manual
Enable Coupon
1. Press the blue service button directly on the back of the bill feed opening, below
the bill stacker.
T o p o f B ill S ta c k e r
B
l
u
e
S
e
r
v
i
c
e
B
u
t
t
o
n
Figure 7. Blue Service Button Location
2. The Bezel Lights on the bill acceptor opening will start blinking.
3. Feed the coupon you want to be enabled.
4. The coupon will be drawn into the bill validator, and then will be ejected.
5. The flash code LED (see Section Error! Reference source not found.) will flash
10 times to indicate the coupon is enabled.
Disable Coupons
1. Press the blue service button directly on the back of the bill feed opening, below
the bill stacker.
2. The Bezel Lights on the bill acceptor opening will start blinking.
3. Feed the coupon you want to be disabled.
4. Coupon will be drawn into the bill validator, and then will be ejected.
5. The flash code LED (see Section Error! Reference source not found.) will flash
3 times to indicate the coupon is disabled.

Unitec Wash Select II Specifications

General

Brand	Unitec
Model	Wash Select II
Category	Touch terminals
Language	English