Unitec Wash Select II User Manual

W A S H S E L E C T I I
Document Number: WS21002 16
Document Title: WSII Operations Manual
5. If External Fleet is enabled, “Ack Activation?” will be displayed. Set to Yes if the
External Fleet system requires the WSII to send back an acknowledgement of the
card approval. Please consult the manufacturer of he External Fleet system for
the proper setting.
Note: If “Ack Activation” is enabled, Optioning will be disabled automatically.

Warning:
This command is used to erase all fleet accounts. Erased data cannot be recovered!
2.2.16 Erase All Fleets
1. Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)
2. Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the "Fleets & Coupons" option is displayed. Press the (*) key to
enter.
3. Use the (3) key to scroll until the "Erase All Fleets" option is displayed. Press the
(*) key to enter.
4. You will be asked, “Delete all of the accounts?” Press the (1) key for YES or the
(3) key for no. If you answer yes, you will be asked if you are sure. Press the (1)
key for YES or the (3) key for NO.
2.3 Credit System
The Credit system manages credit transactions. These include credit cards and proprietary
cards such as the GiveX card. Credit system options are configured using the Credit System
menu.

Note:
The Wash Select II is Cardholder Information Security Program (CISP) compliant:
Being CISP compliant, Wash Select II does NOT:
 Store or print magnetic stripe data or card verification data subsequent to initial
authorization of a transaction;
 Store complete credit card number or expiration date after the transaction is
settled.
 Print complete credit card number or expiration date on any printouts, including
output through Remote Report. 
2.3.1 Obtaining a Merchant Account
You must have a Merchant Account in order to use the Credit option.
If you have not acquired a merchant account, contact Unitec at 1-443-561-1200 for
compatible merchant account specifications to ensure that your merchant account provider
will operate with Unitec equipment.

Unitec Wash Select II Specifications

General

Brand	Unitec
Model	Wash Select II
Category	Touch terminals
Language	English