W A S H S E L E C T I I
Document Number: WS21002 73
Document Title: WSII Operations Manual
3. Using the (3) key scroll through this menu until “Cash Mode” is displayed, and
then press the (*) key to enter.
4. Press (1) to enable Cash Acceptance, or (3) to disable Cash Acceptance.
2.12 Miscellaneous Setup Menu
This menu contains features that do not fall under another specific category.
2.12.1 Alarm Duration
With the purchase of the Security Alarm option, you can set the length of time that the alarm’s
siren will sound using this command. To set the alarm duration:
1. Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)
2. Using the (3) key on the Wash Select II keypad to scroll forward, (the (1) key
scrolls backward) scroll through the “Main Menu” until “Misc. Setup” is displayed.
3. Press the (*) key to enter.
4. Using the (3) key on the Wash Select II keypad to scroll forward, (the (1) key
scrolls backward) scroll through the menu until “Alarm Duration” is displayed.
Press the (*) key to enter.
5. Enter the length of time you want the alarm to sound in minutes (from 1-60) and
press the (*) key.
6. Default: 5 minutes
2.12.2 Set System Date and Time
The Wash Select II will accurately keep a running date and time stamp for use in processing
data and keeping accounting records. Be sure the date and time are programmed accurately.
To set the date and time follow the instructions below.
1. Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)
2. Using the (3) key on the Wash Select II keypad to scroll forward, (the (1) key
scrolls backward) scroll through the “Main Menu” until “Misc. Setup” is displayed.
3. Press the (*) key to enter.
4. The first option displayed in this menu will be “Set Date and Time”, press the (*)
key to enter.
5. Now you will begin to program the date this will be entered in (MM/DD/YY)
format.
6. The Wash Select II will display “Enter the Month”. Enter the two-digit month and
then press the (*) key to enter.
To Next Page
Loading...
Need help?
General