Upright TM12 Service & Parts Manual

Page 1-1TM12 Work Platform - European
Section 1
I
NTRODUCTION
1.1 I
NTRODUCTION
P
URPOSE
The purpose of this service and parts manual is to provide instructions and illustrations for the
operation and maintenance of the Work Platform manufactured by UpRight, Inc. of Selma, Cali-
fornia.
S
COPE
The manual includes procedures for proper operation, maintenance, adjustment, and repair of
this product as well as recommended maintenance schedules and troubleshooting.
1.2 G
ENERAL
D
ESCRIPTION
The TM12 Work Platform is a self-propelled aerial work platform designed to be used as a
means of elevating personnel and equipment and to provide a mobile work platform. Mobility
with the platform elevated is automatically limited to the low speed range.
1.3 P
URPOSE AND
L
IMITATIONS
The objective of the Work Platform is to provide a quickly deployable, self-propelled, variable
height work platform. The elevating function shall only be used when the work platform is on a
firm level work area. The work platform is intended to be self-propelled when in relatively close
proximity to the work area.
DANGER
! !
The elevating function shall ONLY be used when the work platform is level
and on a firm surface. The work platform is NOT intended to be driven over
uneven, rough or soft terrain.

Upright TM12 Specifications

General

Brand	Upright
Model	TM12
Category	Lifting Systems
Language	English