Uson 628 - Program Categories

5-2 Uson 628 Operator’s Manual
5.3 Program Categories
The program parameters are sub-divided into individual menus to provide ease of
access. See Table 5–1 for the submenus under the Program menu bar.
Table 5–1: Menu Item Descriptions - Program
Program: Menu Item Description
Program Test settings for selected program.
Data General Options.
Date Time Clock Settings.
Setup Global Settings.
Config Tester configuration details.
Gauge Sensor
Sensor configuration details, including calibration
option.
Diff Sensor
Sensor configuration details, including calibration
option.
Regulator Regulator setup.
Hardware General options to check operation.
Run Mode Selects Run mode.