Program Mode 5-11
5.3.9 Differential Sensor
This menu displays the differential sensor configuration. The menus are:
* Set by manufacturing and cannot be modified.
Differential Sensor Menu Parameters
Parameter Description
Sensor Type*
Set to Differential.
Sensor Unit
Defines the measurement unit.
Calibrate *
Function to perform zero and span calibration.
Calibration Data
Displays the current calibration data:
Last calibration date and time
Adc Zero Count reading, defaults to 0.
Adc Span Count for target pressure, defaults to value based on range
selection.
Target value, defaults to sensor range.
Auto Zero Control
Enables/Disables autozero function. Defaults to off.
Auto Zero Value
Zero offset value in counts.
To Next Page
Loading...
