Basic Operation
3-23
3
7 Check the destination list.
Select a destination and press [Detail/Edit] to check
and edit it.
Select a destination and press [Delete] to remove
the destination from the list.
8 Press the Start key. Sending begins.
NOTE: When selecting [On] for Entry Check for
New Destination (page 9-46), the confirmation
screen appears. Enter the same destination again
and press [OK].
When selecting [On] for Destination Check before
Send (page 9-45), the confirmation screen appears
after pressing the Start key. For details, refer to
Confirmation Screen of Destinations on page 3-28.
To Next Page
Loading...
