Utax 2550ci User Manual

Management
10-14
Use the procedure below.
1 Press the System Menu key.
2 Press [User Login/Job Accounting].
3 If the user authentication screen appears, enter
your login user name and password and then press
[Login]. For this, you need to login with
administrator privileges. The login user name and
login password are both set to "2500" in the factory
default state.
4 Press [Next] of User Login Setting, [Next] of Guest
Authorization Set., and then [Change] of Guest
Property.
5 Press [Change] of User Name.
6 Enter the user name and press [OK].
7 Press [Change] of Account Name.
8 Select the account and press [OK].
9 Press [Next] of Authorization Rules.
10 Press [Change] of Print Restriction.
11 Select [Reject Usage] or [Off] and press [OK].
12 Repeat steps 11 and 12 to set Print Restriction
(Color), Copy Restriction, Copy Restriction (Color),
Copy Restriction (Full Color), Send Restriction, Fax
TX Restriction, Storing Restr. in Box, and Storing
Restr. in Memory.
13 Press [Close].
14 Press [Save].
NOTE: Refer to the Character Entry Method on
Appendix-6 for details on entering characters.
User Login/Job Accounting - Guest Property
User Name:
Authorization Rules:
Close
Account Name:Access Level:
Change
Status
Change
Next
Guest
02Account
User
12/12/2011 10:10
NOTE: Select [Name] and [ID] from the Sort pull-
down menu to sort the account list.
Press [Search(Name)] or [Search(ID)] to search by
account name or account ID.

Utax 2550ci Specifications

General

Brand	Utax
Model	2550ci
Category	All in One Printer
Language	English