Management
10-21
10
Login/Logout
If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Use the procedure below to login and logout.
Login
1 In the screen below, enter the account ID using the
numeric keys and press [Login].
When the screen to enter the login user
name and password appears
If user login administration is enabled, the screen to
enter the login user name and password appears.
Enter a login user name and password to login.
(Refer to Login/Logout on page 10-3.) If the user
has already registered the account information, the
account ID entry would be skipped. (Refer to
Adding a User (Local User List) on page 10-5.)
2 Proceed to complete the rest of the steps.
Logout
When the operations are complete, press the
Authentication/Logout key to return to the account ID
entry screen.
NOTE: If you entered a wrong character, press the
Clear key and enter the account ID again.
If the entered account ID does not match the
registered ID, a warning beep will sound and login will
fail. Enter the correct account ID.
By pressing [Check Counter], you can refer to the
number of pages printed and the number of pages
scanned.
To Next Page
Loading...
