Utax 2550ci

Management
10-22
Adding an Account (Accounting List)
This section explains how to add a new account. The following entries are required.
Use the procedure below to register a new account.
1 Press the System Menu key.
2 Press [User Login/Job Accounting].
3 If the user authentication screen appears, enter
your login user name and password and then press
[Login]. For this, you need to login with
administrator privileges. The login user name and
login password are both set to "2500" in the factory
default state.
4 Press [Next] of Job Accounting Setting, [Add/Edit]
of Accounting List, and then [Add].
5 Press [Change] of Account Name.
6 Enter the account name and press [OK]. The
Account screen reappears.
7 Follow steps 5 and 6 above to enter the Account ID.
8 Activate or deactivate restriction. Refer to
Restricting the Use of the Machine on page 10-24.
9 Press [Save] to add a new account on the Account
List.
Item Description
Account Name Enter the account name (up to 32 characters).
Account ID
Enter the account ID as many as eight digits (between 0 and 99999999).
Restriction This Prohibits printing/scanning or restricts the number of sheets to
load. Refer to Restricting the Use of the Machine on page 10-24.
Account:
Print Restriction (Total):
Copy Restriction (Total):
Save
Copy Restr. (Full Color):
Account ID:
Cancel
OffOff
Off
00001000
Print Restr. (Full Color):
Off
Account Name:
01
Change
Status
Copy Restr. (SingleColor):
Off
Change
Change
Change
Change
Change
Change
1/2
Account
01
Account
12/12/2011 10:10
NOTE: Refer to the Character Entry Method on
Appendix-6 for details on entering characters.
NOTE: Any account ID that has already registered
cannot be used. Enter any other account ID.