Utax cd 1120 User Manual

2DA/2DB-1
1-4-59
Fax eject location
Sets where incoming faxes will be ejected.
This setting is only available when the optional
fax kit, finisher or job separator are installed in
the machine.
1. Select [Fax Output Destn] and then press the
enter key.
2. Select output location and then press the
enter key.
Default operation mode
Sets whether the display that appears after power
is turned on to the machine will be the one for the
copy operation mode or for the fax operation
mode.
This setting is only available when the optional
fax kit is installed.
1. Select [Main mode] and then press the enter
key.
2. Select [Copy mode] or [Fax mode] and then
press the enter key.
Key sound ON/OFF
Sets whether or not the operation panel will emit
a beep sound each time a key is pressed.
1. Select [Key sound On/Off] and then press the
enter key.
2. Select [On] or [Off] and then press the enter
key.
Day and time
Sets the current date and time.
1. Select [Date/Time] and then press the enter
key.
2. Sets the current date and time.
3. Select [End] and then press the enter key.
Display contrast adjustment
Adjust the display contrast.
1. Select [Display Contrast] and then press the
enter key.
2. Adjust the contrast and then press the enter
key.
Setting range: 1 to 7
Changing the management code
Changes the management code.
1. Select [PIN # Change] and then press the
enter key.
2. Enter a new 4-digit management code using
the numeric keys.
Auto sleep ON/OFF
Sets whether or not to have the auto sleep
function.
This setting is displayed only on the inch
specification model.
1. Select [Auto Sleep] and then press the enter
key.
2. Select [On] or [Off] and then press the enter
key.
Auto clear ON/OFF
Sets whether or not to have the auto clear
function.
1. Select [Auto Clear] and then press the enter
key.
2. Select [On] or [Off] and then press the enter
key.
Auto clear time
Sets the time that elapses from completion of
copying to activation of the auto cler function.
1. Select [Auto Clear Time] and then press the
enter key.
2. Sets the time and then press the enter key.
Setting range: 10 to 270 s
Silent mode ON/OFF
Sets whether or not to use the silent mode which
shortens the length of time that the laser data
writing motor continues to spin after each copy
job is finished.
1. Select [Silent Mode] and then press the enter
key.
2. Select [On] or [Off] and then press the enter
key.

Utax cd 1120 Specifications

General

Brand	Utax
Model	cd 1120
Category	All in One Printer
Language	English