Utax cd 1120

2DA/2DB
1-6-2
(2) Running a maintenance item
Enter “10871087” using
the numeric keys.
Enter “001” using the up/down
cursor keys or numeric keys
and press the start key.
Enter the maintenance item
number using the up/down cursor keys
or numeric keys.
The selected maintenance item is run.
Press the stop/clear key.
Press the start key.
Start
End
Maintenance mode is entered.
The maintenance item is
selected.
Maintenance mode is exited.
Repeat the same
maintenance item?
Run another maintenance
item?
No
No
Yes
Yes