2DA/2DB
1-5-1
1-5-1 Paper misfeed detection
(1) Paper misfeed indication
When a paper misfeed occurs, the machine immediately stops operating and displays the jam location on the operation panel.
Paper misfeed counts sorted by the detection condition can be checked in maintenance item U903.
To remove paper jammed in the machine, open the front cover, left cover, or pull the drawer out.
To remove original jammed in the DP, open the DP original cover.
Paper misfeed detection can be reset by opening and closing the respective covers to turn safety switch off and on.
Figure 1-5-1
1 Misfeed in the drawer 1
2 Misfeed in the drawer 2*
2
3 Misfeed in the drawer 3*
1
4 Misfeed in the drawer 4*
1
5 Misfeed in the bypass tray
6 Misfeed in the paper conveying section
7 Misfeed in the exit section
(Misfeed in the job separator*
1
or finisher*
1
)
8 Misfeed in the DP*
1
*1: Optional.
*2: Optional for 16 ppm model.
Standard for 20 ppm model.
11
5
6
7
8
22
33
44
To Next Page
Loading...
Need help?
General
