2DA/2DB
1-6-17
(10-2) Adjusting the leading edge registration for memory image printing
Make the following adjustment if there is a regular error between the leading edge of the copy image and the leading
edge of the original during memory copying.
U053
(P. 1-4-13)
U066
(P. 1-6-35)
U065
(P. 1-6-34)
U403
(P. 1-6-37)
U407
U034
(P. 1-6-16)
Caution:
Before making the following adjustment, ensure the above adjustments have been made in maintenance mode.
Procedure
Original Copy
example 1
Copy
example 2
Figure 1-6-32
Yes
No
Start
Enter maintenance mode.
Enter “407” using the numeric keys.
Press the start key.
Press the interrupt key.
Press the start key
and make a test copy.
Is the leading edge
registration correct?
Press the start key.
The new setting is stored.
Setting range: –2.0 – +2.0
Initilal setting: 0.0
Changing the value by 1 moves
the leading edge by 0.1 mm.
Press the stop/clear key to
exit maintenance mode.
End
For copy example 1, increase the
value using the right cursor key.
For copy example 2, decrease the
value using the left cursor key.
To Next Page
Loading...
Need help?
General
