UTC Fire and Security FenwalNET 8000-ML User Manual

Operation
P/N 06-237041-001 4-9 February 2011
e. Press the 3 Key to select “SET TIME FORMAT”
Figure 4-12. Sub-Menu for Time-Display Format
f. Press the <BACKSPACE> key.
g. Press the 1 Key again to select "AM/PM" format
Figure 4-13. Sub-Menu to Enter Current Time
h. Enter the time (HH = hours, 0-12; MM = minutes, 0-59) using the digits keys. Press
the <ENTER> Key to finish your entry.
i. Press the 1 Key for AM or the 2 Key for PM as indicated below, and then press the
<ENTER> Key to enter your selection:
Figure 4-14. Sub-Menu to Complete Current-Time Entry
j. The display will indicate the following message:
Figure 4-15. Time Updated
The display will return to the sub-menu below when you press the <BACKSPACE>
Key:
Figure 4-16. Time/Date Sub-Menu
k. Press the 2 Key to select "SET DATE"
Figure 4-17. Sub-Menu to Enter Current Date
1: AM/PM 2: MILITARY
SET TIME (AM/PM 1-12 HOURS)
ENTER THE TIME *_:_ _ (HH:MM)
SET TIME (AM/PM)
1:AM 2:PM *
SYSTEM TIME (AM/PM)
TIME HAS BEEN UPDATED
1: SET TIME 2: SET DATE
3: SET TIME FORMAT
SYSTEM DATE
ENTER THE DATE *_-_ _-_ _ (MM-DD-YY)

UTC Fire and Security FenwalNET 8000-ML Specifications

General

Brand	UTC Fire and Security
Model	FenwalNET 8000-ML
Category	Control Unit
Language	English