Conversion Instructions for FenwalNET 2000
P/N 06-237041-001 H-1 February 2011
APPENDIX H
CONVERSION INSTRUCTIONS FOR FENWALNET 2000
H-1 INTRODUCTION
This appendix provides instructions on how to convert a FenwalNET
TM
2000 control unit into a
fully-functional 2-Tiered FenwalNET
8000-ML
TM
control unit, housed in the existing FenwalNET
2000 enclosure.
H-2 FENWALNET 2000 CONTROL UNIT RETROFIT KIT
This procedure requires the purchase of one FenwalNET 2000 Control Unit Retrofit Kit
(P/N 74-800400-001) for each FenwalNET 2000 control unit to be retrofitted. The retrofit kit consists
of both conversion parts and operational parts.
H-2.1 Conversion Parts
The following parts are needed to convert the enclosure:
Part Name Illustration
base plate
base plate bracket
replacement door
installation hardware
•#6 nuts (4)
•#8 nuts (2)
• #10 nut (1)
• self-threading screws (2)
• #8 machine screw/nut
To Next Page
Loading...