General Information
February 2011 1-4 P/N 06-237041-001
1-5 SYSTEM COMPONENTS
The main components of the basic FenwalNET 8000-ML control unit are:
•System Enclosure
• Main Controller Board with keypad and display
• Power Supply Unit/Power Management Assembly
• Standby Batteries, 12 Vdc (2 required for 24 Vdc - sold separately)
1-6 OPTIONAL COMPONENTS
• Expansion Card Cage and backplane to house optional Expansion Cards:
– Signal Line Circuit (SLC) Card
– Release/Notification Appliance Circuit (R-NAC) Card
–Relay Card
–City Tie Card
• Trim Ring for flush-mounted enclosures
• Additional Expansion Enclosures
• Additional Power Supply Units/PMU Boards
• Battery Tray for bottom tier
• Large Capacity Battery Cabinet
• Remote Display Control Module (RDCM) with enclosure
• Remote LED Annunciator Module (R-LAM) with enclosure
• Integrated LED Annunciator
• Remote Configuration Software (for connectivity to user-supplied PC)
1-7 SYSTEM ENCLOSURE TYPES
The FenwalNET 8000-ML control unit enclosure is designed to house all of the standard features of
the control unit; expanded systems may require additional enclosures.
Two different sizes of the enclosure are available (specified at time of order):
• 3-Tiered Main or Expansion Enclosure: 31.50 in. (H) x 14.375 in. (W) x 5.375 in. (D)
• 2-Tiered Main or Expansion Enclosure: 22.50 in. (H) x 14.375 in. (W) x 5.375 in. (D)
Additional cabinets are available for remote use/LED Annunciation and larger capacity batteries:
• RDCM/LED Annunciator Remote Enclosure: 7.50 in. (H) x 12.75 in. (W) x 2.75 in. (D)
• Large Capacity Battery Cabinet: 12 in. (H) x 20in. (W) x 8.25 in. (D)
To Next Page
Loading...
Need help?
General