UVITEC Cambridge FIREREADER MAX - THE APPLICATION PROTOCOL; What is an Application protocol

UVITEC – Cambridge
197/225
FIREREADER
FIREREADERFIREREADER
FIREREADER SERIES
SERIESSERIES
SERIES
T H E A P P L I C A T I O N P R O T O C O L
What is an Application protocol
FireReader 1D software runs with pre-defined image acquisition parameters to facilitate the use of the
system for a specific application. These pre-defined parameters are gathered in the FireReader 1D
Application protocol.
The Application protocol automates a task or a set of tasks that you perform repeatedly or on a
regular basis. It stores the following information:
- The image exposure pre-defined set-up;
- The live preview pre-defined parameters;
- The image display pre-defined set-up;
- The image printing pre-defined set-up;
- The image file pre-defined set-up.
The factory settings include 3 pre-defined Application protocols:
- SafeLight
- UV fluorescence
- Conversion screen
You can also create your own Application protocol.
The benefits of the Application protocol are as follows:
 Time saving
 Reproduction of image acquisition parameters
 Protocol are modifiable, allowing the user to maintain an original template while modifying it for
a slightly different result, with minimal effort