38 D292469I
a. >QUIT MENU
i. With the curser > in front of >QUIT MENU, press the YES key to
exit the menu.
ii. With the curser > at any position in the menu, pressing the NO
key to place the curser in front of >QUIT MENU.
b. >PROCESS RECIPE
Select desired Recipe.
i. Press the YES Key. >PROCESS RECIPE line becomes active.
Note: When a line becomes active the '>' changes to a '*'. This applies to all
menus that have multiple options for a particular line.
ii. Use +/ - keys to select RECIPE 1 through RECIPE 9.
iii. Press YES key. The LCD will display one of the following:
• SAVING RECIPE # X: All current machine settings will be saved to
whatever recipe number is currently loaded/selected.
• LOADING RECIPE # X: The new recipe number selected will be
loaded into the system. Use the ARROW key to move the cursor
down to the next line item of the menu.
c. >PICK FROM WAFER - PLACE TO OUTPUT
Select desired Pick & Place function.
i. Press the YES key. The >PICK FROM WAFER - PLACE TO OUTPUT
line becomes active.
ii. Use the + / - keys to scroll through the available options and
select the Pick and Place function desired. A few examples of Pick
and Place options are listed below:
• Pick from Wafer, Place to Output
• Pick from Tray, Place to Output
• Pick from Gel-Pak, Place to Output
• Pick from Tray, Place to Left
iii. Press the YES key again to select the chosen option. Use the
ARROW key to move the cursor down to the next line item of the
menu.
To Next Page
Loading...