DE35-ST Operating Instructions
D292469I 39
d. >4 TRAYS, 2 IN. - PLATE 3105
Select desired Output.
i. Press the YES key. >4 TRAYS, 2 IN. - PLATE 3105 line becomes
active.
ii. Press + / - keys to scroll through the output types available and
choose the desired output. A few examples of Output options are
listed below:
• 2 Trays, 2 In Vacuum Release Plate 13784
• 1 Tray, 4 In Plate 3084
• 2 Trays, 4 In Plate 5089
• 2 Trays, 4 In Vacuum Release Plate 16712
• 2 Vials Plate 9948
• 1 Substrate Plate 13472
• Wafer Output Type 8 Plate 5528
• Wafer Output Type 7 Plate 12758
• Wafer Output Type 27 Plate 13679
• Wafer Output Type 7 & 29 Plate 14468
Note: Not all fixtures shown in software are available on all systems. Please
contact Customer Service for assistance in selecting the appropriate plate
number if the plate you are using is not found.
iii. Press the YES key to select the chosen option. Use the ARROW
key to move the cursor down to the next line item of the menu.
NOTE: The X-arm may move.
e. >X Output Grades
This line when active allows you to choose from 1, 2, 3 or 4 grades for
your output when using any 4-pack configuration. You can choose 1 or 2
grades when using any 2-pack configuration.
By default all trays are set to Grade 1. To assign a different grade to a
tray:
i. Use the ARROW key to move the cursor ( > ) so it points at the
desired tray.
ii. Press Yes to make to make that tray active.
To Next Page
Loading...