Options vacon • 85
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
8
Figure 64. Changing control places.
Accessing the control page
The
Control page is meant for easy operation and monitoring of the most essential values.
1. Anywhere in the menu structure, push the
FUNCT button.
2. Push the
Arrow up or the Arrow down button to select Control page and confirm with the OK
button.
3. The control page appears
If keypad control place and keypad reference are selected to be used you can set the
Keypad
Reference
after having pressed the OK button. If other control places or reference values are
used the display will show Frequency reference which is not editable. The other values on the
page are Multimonitoring values. You can choose which values appear here for monitoring.
Figure 65. Accessing Control page.
To Next Page
Loading...
