Why does Vaisala Weather Station navigation indicator show fewer pages than expected?
If the navigation indicator on your Vaisala Weather Station shows fewer pages than expected, the system may have just started, and all page data has not yet been received. Wait until all data has been received.
Why is there no navigation indicator on Vaisala Weather Station data page?
If there is no navigation indicator on the data page of your Vaisala Weather Station, it might be because only one page is available. If more pages should be available, check the site settings.
General| Brand | Vaisala |
|---|---|
| Model | AviMet WID511 |
| Category | Weather Station |
| Language | English |
Details about different document versions and their applicability.
Explanation of symbols, warnings, and notes used in the documentation.
Lists registered trademarks of Vaisala and other mentioned companies.
Overview of the WID511's design, purpose, and features for aviation.
General safety warnings and precautions for using the product.
Instructions to prevent damage from electrostatic discharge.
Lists applicable directives and compliance statements.
Details the equipment's compliance with FCC Part 15 rules.
Explains how the WID511 receives and processes wind sensor data.
Lists supported Vaisala wind sensors and message formats.
Describes the physical ports for serial, Ethernet, and USB connections.
Lists the sequence of steps for installing the display unit.
Provides safety guidelines specific to the installation process.
Guidance on choosing a location, dimensions, and mounting methods.
Instructions for unpacking the unit and removing front/back covers.
Details on connecting serial, Ethernet, and power cables, plus grounding.
Information regarding the optional connector plate for connections.
Procedures for mounting the display on a stand or as a panel display.
Steps for powering the unit, verifying installation, and calibrating.
Initial steps and behavior after powering on the display.
How to interact with the display's touch interface.
Description of Observation, Navigation, and Maintenance modes.
Explains how to use Observation mode, including pages and data fields.
How to navigate between pages, toggle display modes, and view alarms.
Steps to enter and exit basic maintenance settings.
How to adjust audio volume and screen brightness.
Procedures for cleaning the screen and calibrating the touch input.
How to modify units for wind data and configure alert limits.
How to access and view the device's software and license details.
Overview of advanced settings and how to access them.
How to exit advanced mode and description of available buttons.
Steps for using the typing pad and managing configuration files.
Procedures for backing up and restoring configuration via USB.
Viewing network information and changing IP addressing.
Selecting displayed data pages and configuring messages.
Settings for serial COM ports and viewing incoming data.
Settings for Ethernet NET ports and viewing incoming data.
Configuring station settings like declination and device time.
Procedures for accessing internal components for troubleshooting.
Lists common issues and their solutions for troubleshooting.
Solution for when the display is unresponsive.
Troubleshooting steps when the display shows no image.
Solution for the device stuck on the starting screen.
Troubleshooting steps if only the display logo is shown.
Explanation for slash marks appearing instead of data.
Steps to resolve issues with inaccurate measurement data.
Troubleshooting for touch screen input accuracy problems.
Solutions for visibility issues with screen content.
Troubleshooting steps for when alarm sounds are not audible.
Steps to resolve the absence of the navigation indicator.
Troubleshooting for an incorrect number of pages shown in the indicator.
Explanation of the device's status indicator LEDs.
Lists and explains potential error messages displayed by the device.
Details on operating environment, inputs/outputs, user interface, and compliance.
Information on housing material, mounting options, and dimensions.
List of available accessories for the display unit.
Overview of different wind data message formats supported.
Detailed description of the MWV message format.
Detailed description of the WMT700 data message format.
Detailed description of the WAT11 message format.
Instructions for connecting sensors to the display unit.
Specific wiring instructions for connecting the WMT700 sensor.
To Next Page
