1. Enter a Site Code, if required, for all cards assigned to this user profile. See Supported card readers
and card formats on page388.
2. Select the Access rights of this user profile for the doors configured on the system. Options are:
- No access
- No time limit (that is, 24 hour access)
- Calendar (if configured)
3. Users using this User Profile
A list of users assigned to this profile is displayed. Click a user to view or edit the user’s details.
You can create a new user profile based on an existing profile by clicking Replicate. A new User Profile
page is displayed.
See also
Adding/Editing User Profiles on page199
Adding/Editing an area on page270
17.8.3 Configuring SMS
The SPC system allows remote (SMS) messaging on systems with installed modems.
Prerequisites
o
A modem is installed and identified by the system.
o
The function SMS Authentication is activated. (See Options on page252.)
1. Select Users>Users SMS.
The Engineer SMS ID and a list of user SMS IDs with corresponding SMS details are displayed.
2. Click the Test button to test an SMS number.
3. Click Add to add a new SMS ID or click the Editicon beside the required SMS ID.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 203 A6V10276959-d
11.2018
To Next Page
Loading...