Torque to 180 in-lbs.
Busbar Assy P/N 514690 (1) 5/8-11 x 1-3/4" Bolt, P/N 227653800
5/8-11 x 2-3/4" Bolt, P/N 227653900
and
(1) 5/8" Lock Washer, P/N 215111800
and
(1) 5/8" Flat Washer, P/N 214201300
P/N 214825000
P/N 214825000
(4) 3/8" Belleville Washer
P/N 228567100
(4) 3/8-16 Hex Nut
Note: Concave Side of Belleville
Washer Faces Busbar,
Convex Side Faces Nut.
(6) 3/8" Flat Washer
P/N 214204100
(6) 3/8" Belleville Washer
P/N 214825000
(6) 3/8-16 x 1-1/4" Bolt
P/N 22764680
0
Torque to 180 in-lbs.
Note: Concave Side of Belleville
Washer Faces Busbar,
Convex Side Faces Bolt Head.
Belleville Washer install between
Bolt Head and Flat Washer.
Previously Assembled
Kit P/N 554873
Busbar, P/N 514469
Busbar, P/N 514541
Busbar, P/N 514469
Busbar, P/N 514467
P/N 514691 Only
Busbar, P/N 514469
P/N 514691 Only
Busbar, P/N 514522
Busbar, P/N 514469
Busbar, P/N 514467
P/N 514691 Only
STEP 2A
Install "Busbars".
(see Step 2B for Bolt Hole Identification)
(s
ee Step 2C for Assembled View)
Note: Apply Electrical Anti-Oxidation
Compound to all Busbar
Mating Surfaces.
* Use "Spacer Busbars" or "Spacer Insulators"
on end bays or stand-alone bays. For multiple
bays, use "Spacer Busbars" and move out
to 'bridge' between busbars of both
Assemblies (see Assembled View).
(4) 3/8-16 x 2" Bolt, P/N 227647400
or
Busbar Assy P/N 514691
or
Torque to 715 in-lbs.
Spacer Busbar, P/N 514472*
Spacer Insulator, P/N 514473*
P/N 514691 Only
Spacer Busbar, P/N 514472*
Spacer Insulator, P/N 514473*
Spacer Busbar, P/N 514472*
Spacer Insulator, P/N 514473*
P/N 514691 Only
Spacer Busbar, P/N 514472*
Spacer Insulator, P/N 514473*
To Next Page
Loading...
Need help?
General
