Vertiv | SmartCabinet | User Manual 133
General Maintenance
Chapter 5: General Maintenance
In this chapter, the following points will be discussed in brief:
• Safety Instructions
• Maintenance of Main components
• General Troubleshooting
• FAQs for the MSC Intelligent monitoring card
5.1. Safety Instructions
Following are the safety instructions that need to be observed during the maintenance process:
• Switch o the power input during the equipment maintenance. Switch o the equipment power unless the
testing devices need power.
• Only authorized personnel and technicians are allowed to maintain the system.
• All maintenance and operation must follow the local laws, especially the regulations about the electric
power, refrigeration, and production.
• Comply with the manufacturer’s instructions before and during maintenance., Failure to observe this will
result in the warranty becoming void.
• Adherence to the safety instructions is mandatory to ensure personnel safety and prevent any environ-
mental spoilage apart from equipment damage.
• Unsuitable components will lead to hindrance in the performance of the equipment and even equipment
shutdown. Therefore, Vertiv recommends the use of Vertiv OEM or Vertiv-approved components.
5.2. Maintenance of Main components
In this section, the general maintenance of main components will be discussed.
5.2.1. AC System Maintenance
The AC System maintenance will be explained in four sections, namely:
1. Electrical Inspection
To Next Page
Loading...