Vertiv SmartCabinet - 4.1.5.2. Password; 4.1.5.3. Network

Vertiv | SmartCabinet | User Manual 75
System Operation
4.1.5.2. Password
The Password function is used to change the password settings on the local LCD Screen. Incidentally, the
password function can also be accessed using the web pages of the SmartCabinet unit (Refer Figure 4-20).
Figure 4-20 Password Settings
After entering the old and new password, click Save to store the updated password.
4.1.5.3. Network
The Network function is used to modify the IP address of the SmartCabinet unit:
Figure 4-21 Network settings