virtual access GW2024P-2 User Manual

14: Configuring ignition sense
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 112 of 350
14.4 Ignition sense diagnositcs
14.4.1 Monitoring Vapowermond status using the command line interface
To view status information about the current ignition sense state enter:
root@VA_router:~# cat /sys/class/gpio/gpio29/value
1
1 for ignition on;0 for ignition off

virtual access GW2024P-2 Specifications

General

Brand	virtual access
Model	GW2024P-2
Category	Wireless Router
Language	English