virtual access GW2024P-2 User Manual

10: Router file structure
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 68 of 350
10.8.2 Exporting a configuration file using the web interface for software version
72.002 and above
The current running configuration file may be exported using the web interface.
In the top menu, select System > Flash Operations. The Flash operations page
appears.
Figure 42: The flash operations page
In the Flash Operation section, click the configuration file in the Contents column to
download it.
10.8.3 Exporting a configuration file using UCI
You can view any configuration file segment using UCI.
To export the running configuration file, enter:
root@VA_router:~# uci export
To export the factory configuration file, enter:
root@VA_router:~# uci –c /etc/factconf/ export
To export config1 or config2 configuration file, enter:
root@VA_router:~# uci –c /etc/config1/ export
root@VA_router:~# uci –c /etc/config2/ export
10.9 Importing a configuration file
If you have software versions prior to 72.002, to export a configuration file using the
web interface, go to section 8.9.1
If you have software version 72.002 or above, export a configuration file using the web
interface go to section 8.9.2

virtual access GW2024P-2 Specifications

General

Brand	virtual access
Model	GW2024P-2
Category	Wireless Router
Language	English