virtual access GW2024P-2 User Manual

13: Configuring an Ethernet interface on a GW1000 router
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 96 of 350
There are two sections in the Interfaces page.
Section
Description
Interface Overview
Shows existing interfaces and their status. You can create new, and edit existing
interfaces here.
ATM Bridges
ATM bridges expose encapsulated Ethernet in AAL5 connections as virtual Linux
network interfaces, which can be used in conjunction with DHCP or PPP to dial
into the provider network.
13.3 Interface overview: editing an existing interface
To edit an existing interface, from the interface tabs at the top of the page, select the
interface you wish to configure. Alternatively, click Edit in the interface’s row.
13.3.1 Interface overview: creating a new interface
To create a new interface, in the Interface Overview section, click Add new interface.
The Create Interface page appears.
Figure 50: The create interface page

virtual access GW2024P-2 Specifications

General

Brand	virtual access
Model	GW2024P-2
Category	Wireless Router
Language	English