Name: virtual access GW2024P-2
Brand: virtual access
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6: Accessing the router

_______________________________________________________________________________________________________

_____________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 1.9 Page 42 of 350

6.16 Securing uhttpd

By default, uhttpd binds to 0.0.0.0 which also includes the WAN port of your router. To

bind uhttpd to the LAN port only you have to change the listen_http and listen_https

options to your LAN IP address.

To get your current LAN IP address, enter:

uci get network.lan.ipaddr

Then modify the configuration appropriately:

uci set uhttpd.main.listen_http='192.168.1.1:80'

uci set uhttpd.main.listen_https='192.168.1.1:443'

config 'uhttpd' 'main'

list listen_http 192.168.1.1:80

list listen_https 192.168.1.1:443

Questions and Answers:

Need help?

Do you have a question about the virtual access GW2024P-2 and is the answer not in the manual?

virtual access GW2024P-2 Specifications

General