Name: virtual access GW2024P-2
Brand: virtual access
Rating: 4 (1 reviews)

To Next Page

To Previous Page

20: Configuring BGP (Border Gateway Protocol)

_______________________________________________________________________________________________________

_____________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 1.9 Page 148 of 350

bgpd.ROUTEMAP.order=10

bgpd.ROUTEMAP.permit=yes

bgpd.ROUTEMAP.match_type=ip address

bgpd.ROUTEMAP.match=192.168.101.1/32

bgpd.ROUTEMAP.set_type=ip next-hop

bgpd.ROUTEMAP.set='192.168.101.2/32'

To change any of the above values use UCI set command.

20.4 Configuring BGP using packages options

root@VA_router:~# uci export bgpd

package bgpd

config routing 'bgpd'

option enabled 'yes'

option router_id '3.3.3.3'

option asn '1'

list network '11.11.11.0/29'

list network '192.168.103.1/32'

config peer

option route_map_in 'yes'

option ipaddr '11.11.11.1'

option asn '1'

option route_map 'ROUTEMAP'

config routemap 'ROUTEMAP'

option order '10'

option permit 'yes'

option match_type 'ip address'

option match '192.168.101.1/32'

option set_type 'ip next-hop'

option set '192.168.101.2/32'

Questions and Answers:

Need help?

Do you have a question about the virtual access GW2024P-2 and is the answer not in the manual?

virtual access GW2024P-2 Specifications

General