virtual access GW2024P-2 User Manual

16: Configuring VLAN
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 126 of 350
Web Field/UCI/Package Option
Description
Web: Name of the new interface
UCI: network.vlan1=interface
Opt: interface
Type the name of the new interface. For example, VLAN1.
Web: Protocol of the new interface
UCI: network.vlan_test.proto
Opt: proto
Protocol type. Select Static.
Option
Description
Static
Static configuration with fixed address and
netmask.
DHCP Client
Address and netmask are assigned by
DHCP.
Unmanaged
Unspecified
IPv6-in-IPv4
(RFC4213)
Used with tunnel brokers.
IPv6-over-
IPv4
Stateless IPv6 over IPv4 transport.
GRE
Generic Routing Encapsulation protocol
IOT
L2TP
Layer 2 Tunnelling Protocol
PPP
Point to Point Protocol
PPPoE
PPP over Ethernet
PPPoATM
PPP over ATM
LTE/UMTS/
GPRS/EV-DO
CDMA, UMTS or GPRS connection using an
AT-style 3G modem.
Web: Create a bridge over multiple
interfaces
UCI: network.vlan1.type
Opt: type
Create a bridge over multiple interfaces.
Web: Cover the following interface
UCI: network.vlan1.ifname
Opt: ifname
Check the Custom Interface radio button.
Enter a name, for example eth0.100. This will assign VLAN 100
to the eth0 interface.
Table 40: Information table for the create interface page
Click Submit. The Interfaces page for VLAN1 appears.

virtual access GW2024P-2 Specifications

General

Brand	virtual access
Model	GW2024P-2
Category	Wireless Router
Language	English