virtual access GW2024P-2 User Manual

26: Configuring IPSec
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 233 of 350
26.4.2 Configure connection settings
Scroll down to view the connection settings section.
If you want to create a DMVPN, you do not need to configure all settings as the DMVPN
will automatically create them using the template. Leave the following sections blank:
 Remote GW Address
 Local ID
 Remote Id
 Local LAN IP Address
 Local LAN IP Address Mask
 Remote LAN IP Address
 Remote LAN IP Address Mask

virtual access GW2024P-2 Specifications

General

Brand	virtual access
Model	GW2024P-2
Category	Wireless Router
Language	English