virtual access GW2024P-2 User Manual

31: Configuring Terminal Server
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 290 of 350
Web Field/UCI/Package Option
Description
Web: Enable
UCI: tservd.main.enable
Opt: enable
Enables Terminal Server on the router.
0
Disabled.
1
Enabled.
Web: Debug Enable
UCI: tservd.main.debug_ev_enable
Opt: debug_ev_enable
Enables detailed debug logging.
0
Disabled.
1
Enabled.
Web: Syslog severity
UCI: tservd.main.log_severity
Opt: log_severity
Determines the syslog level. Events up to this priority will be
logged.
0
Emergency
1
Alert
2
Critical
3
Error
4
Warning
5
Notice
6
Informational
7
Debug
Web: Log RX-TX
UCI: tservd.main.debug_rx_tx_enable
Opt: debug_rx_tx_enable
Enables logging data transfers.
0
Disabled.
1
Enabled.
Table 101: Information table for main settings
31.3.2 Configure port settings
The Port Settings section is divided into 3 sub-sections:
 General
 Serial
 Network
31.3.2.1 Port settings: general section
In this section you can configure general port settings. The settings are usually the same
for the central and the remote site.

virtual access GW2024P-2 Specifications

General

Brand	virtual access
Model	GW2024P-2
Category	Wireless Router
Language	English