Visionix EyeRefract User Guide
15
Equipment and Installation
Open the connecting clips on the top cover of the box, and then remove them.
Remove the top cover.
Lift the outer box up to remove it.
Remove the polystyrene foam padding from around the unit.
Polystyrene foam padding removed
With the plastic bag still on it, carefully grasp the EyeRefract unit from its base, lift it up,
and place it on a table.
Important!
Do not lift the unit by its heads or its headrest (#1 below). It should only be lifted from its base
(#2 below).
To Next Page
Loading...
