Volcano CORE Mobile - Page 101

300004969171/B Page 101 of 148
Error starting video loop
recording.
The hard drive may be full.
Archive cases, delete them
from the hard drive and then
try to record video loop again.
If the problem persists, call
Technical Support.
Error creating a new
patient case.
There was a problem synchronizing the
Volcano system patient data with GE’s
Innova system.
Reboot the system and try
again. If problem persists, call
Technical Support.
Error saving patient case
to hard drive.
There is a problem with the hard drive.
Contact Technical Support.
Error retrieving patient
case.
There is a problem with the hard drive.
Contact Technical Support.
Retrieve from DVD
failed.
There is a problem with the DVD or the
DVD drive.
Try retrieving a patient case
from another DVD. If that
fails, please contact Technical
Support. If it works, then the
DVD previously used was
damaged.
Unable to open
<filename>
There is a error opening the DICOM
configuration dialog.
Reboot the system and try
again. If the problem persists,
call Technical Support.
Missing file.
Unable to open the file to
record the time and date
setup.
Missing setup file.
Contact Technical Support.