Volcano CORE Mobile User Manual

Page 144 of 148 300004969171/B
 Subnet Mask: The Volcano systems use the Subnet mask to determine if
communication with the remote host needs to be routed through a gateway. If
so, this field configures the Subnet mask for the system’s subnetwork.
 Gateway: This field is used to configure the gateway IP address for the system.
 Use DHCP: Check this box if DHCP (Dynamic Host Configuration Protocol) is
used to configure the system’s IP address.
 LAN indicator LED (green/red): The light indicates whether a connection is
connected and host is active. If red, user has the option to click on
an Advanced button so user can switch to an active port
 Apply: Select Apply button to apply any setting changes
Local Host–DICOM SCU Settings
 Storage AE Title: The Application Entity Title field is used to configure the AE
title for the local DICOM Store SCU (Service Class User) application running
on the Volcano system. The factory default is VOL_STORE_SCU.
 Worklist AE Title: Enter the AE title for the Worklist.
 Network Timeout: Used to configure the DICOM Association Response Timer
and other network timeouts. This timer is used to terminate the DICOM
association (network connection) if communication between systems stops. The
factory default is 15.
Exchange Media
 The following compression selections are available for archiving images to
DICOM DVD Exchange Media:
o No compression
o JPEG High Quality
o JPEG Medium Quality
o JPEG High Compression

Volcano CORE Mobile Specifications

General

Brand	Volcano
Model	CORE Mobile
Category	Mouse
Language	English