VOLKTEK NSH-5509 User Manual

VOLKTEK NSH-5509 MANAGED 8-PORT 10/100 + 1-PORT 100-FX SWITCH
8.2.1 Homepage (System Details / System Info)
Click on each parameter field to modify the specific settings, click “Undo” to restore
previously saved configurations or click “Apply” to implement newly entered information.
If you change the settings of “IP Address”, “Subnet Mask”, and “Gateway” on “System
information” page, and click “Apply” to implement settings. The system will notify you to
save these settings with a pop-on dialog box.
To save this configuration to flash memory, click “Saving Settings” on the bottom of
“Main Menu”, it will link to saving page, then click the “Save" button.
**Note:
If you change the settings of ‘IP Address’, ‘Subnet Mask’, and ‘Gateway’ on the
‘System information’ page, or DHCP setting on ‘DHCP configuration’ page, you
must save these parameters in order for them to come into effect after you click
20

VOLKTEK NSH-5509 Specifications

General

Brand	VOLKTEK
Model	NSH-5509
Category	Switch
Language	English