VOLKTEK NSH-5509 MANAGED 8-PORT 10/100 + 1-PORT 100-FX SWITCH
1 About This Guide
1.1 Welcome
Congratulations on choosing the NSH-5509 Managed 8-port 10/100Base-TX + 1-port
100-FX Access Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps
Ethernet switching technologies with versatile management capabilities in a highly
flexible package. The device provides various management interfaces – including Web,
serial Console, Telnet, and Command Line (CLI).
1.2 Purpose
This guide discusses how to install and configure your Managed Access Switch.
1.3 Terms/Usage
In this guide, the term “Switch” (first letter upper case) refers to the NSH-5509 Switch,
and “switch” (first letter lower case) refers to other switches.
1.4 Features
• Eight (8) 10/100Base-TX, one (1) 100Base-FX, and one (1) Console port (RJ-45)
• SNMP management application software (HP Open View and IBM/Tivoli NetView
capable)
lnet • Http/Web browser user interface, CLI interface via console and te
• Xpress Ring (redundant ring) with less than 50ms recovery time
per Ethernet ports
2km for multi-mode and up to 120km for long-haul single-
•
•
•
nant Unit and Multiple Dwelling Unit – for example
• Port-based MAC limitation to restrict the number of MAC addresses learned on each
port – improves network security
• Auto-negotiation NWay on cop
• Remote & local management
• Extends fiber distances to
mode fiber
• WDM Single fiber optics
• Status LEDs for quick and easy network activity monitoring
Firmware upgradeable
Console Port (RJ-45) for out-of-band device management. Configure the device
through a Terminal Emulator /TELNET Program
•
• RJ-45 Ethernet Ports support auto MDI/MDI-X
Fiber Port: connect various fiber optic cables (multi-mode, single-mode, long-haul
single-mode, and WDM) to the fiber port
VLAN port isolation function to isolate downlink ports of a VLAN group, making the
Switch suitable as a remote access switch for cases where the operator needs to
service an MTU/MDU (Multiple Te
an apartment building)
5
To Next Page
Loading...
General