VOLKTEK NSH-5509 User Manual

VOLKTEK NSH-5509 MANAGED 8-PORT 10/100 + 1-PORT 100-FX SWITCH
all outgoing frames transmitted with this
VLAN Group ID
9.3.4 SNMP configurations
Changing or setting SNMP parameters to accommodate the network management
systems as needed.
Type a question mark “?” after snmp command to display a full list of help commands
with explanations.
NSH-5009(config)# snmp
contact Set system contact name
getcommunity Set GET community
location Set system location
name Set system name
setcommunity Set SET community
trapcommunity Set TRAP community
trapenable Set TRAP enable
trapip Set TRAP IP address
52

VOLKTEK NSH-5509 Specifications

General

Brand	VOLKTEK
Model	NSH-5509
Category	Switch
Language	English