VOLKTEK NSH-5509 User Manual

VOLKTEK NSH-5509 MANAGED 8-PORT 10/100 + 1-PORT 100-FX SWITCH
Click on each parameter field to modify the desired setting, then click on “Apply” to
implement newly entered information or click on “Undo” to restore previously saved
configurations.
Parameter Description
IP Address
Community Name
Status
Enter the IP address of special host that will be received traps.
Enter community name.
Disable or enable trap distribution.
8.14 E-mail Alarm Configuration
The Switch can send alarm notifications via e-mail to assigned e-mail addresses in case
of any abnormal events. Up to 5 e-mail addresses can be assigned.
Click on each parameter field to modify the desired setting, then click on “Apply” to
implement newly entered information or click on “Undo” to restore previously saved
configurations.
Parameter Description
E-mail Alarm
Mail Server IP
From
To
Alarm Type
Enable / Disable e-mail alarm notification (Default = Disable)
Enter the IP address of the mail server
Valid e-mail address assigned to the Switch
E-mail address(es) to which e-mail will be sent (maximum of 5)
Enable / Disable the type of event that should trigger an e-mail alarm
43

VOLKTEK NSH-5509 Specifications

General

Brand	VOLKTEK
Model	NSH-5509
Category	Switch
Language	English