VOLKTEK NSH-5509 MANAGED 8-PORT 10/100 + 1-PORT 100-FX SWITCH
Weighted Fair Queuing (WFQ) is a packet-scheduling technique allowing guaranteed
bandwidth services. The purpose of WFQ is to let several sessions share the same link.
Once you adjusted the basic settings, use the “Apply” button to implement these
changes.
8.11.2 Tag Priority
The user can define up to eight different priority values for the Tagged VLAN frames.
Select the priority queue number for the Switch to map the MAC frames into different
priority queues: i.e. High, Preferred, Normal or Low. Click “Apply” to implement the
settings.
40
To Next Page
Loading...
General