Volvo Penta Electronic Control System User Manual

INSTALLATION INSTRUCTIO
7740313-7 (Tab 6)
NS
Installation Instructions
Electronic Control System
NB! Present these instructions to the owner
following installation.
Einbauanleitung
Elektronisches Steuersystem
HINWEIS! Diese Anleitung ist nach dem
Einbau der Anlage dem Bootseigentümer
zu übergeben.
Instructions de montage
Système électronique de commande
NB! Ces instructions doivent être remises
au propriétaire après le montage.
Instrucciones de montaje
Sistema de control electrónico
NOTA: Entregar estas instrucciones al pro-
pietario de la embarcación después de la
instalación.
Istruzioni di montaggio
Sistema di comando elettronico
NB! Sottoporre queste istruzioni al cliente,
dopo l’installazione.
Monteringsanvisning
Elektroniskt Reglagesystem
Obs! Efter installationen skall denna anvis-
ning överlämnas till båtägaren.

Volvo Penta Electronic Control System Specifications

General

Brand	Volvo Penta
Model	Electronic Control System
Category	Control Systems
Language	English

Summary

System Overview and Presentation

Electronic Control System Functions

Details the various operational capabilities and features of the electronic control system.

System Component Breakdown

Identifies and describes the individual components that make up the electronic control system.

Operating the Electronic Control System

Operation with Multiple Control Stations

Instructions for operating the system when multiple control stations are connected.

Engine Start and Transmission Engagement

Steps for starting the engine and engaging the transmission with the control system.

Throttle, Idle, and Delay Adjustments

Covers manual throttle control, increased idle programming, and throttle delay.

System Status Indicators and Warnings

Information on backup voltage, ignition status, and gear function lock indicators.

Control Unit LED Indicators

Interpreting LED Flash Patterns

Explains the meaning of red and green LED flash patterns and solid lights.

Button Operation and System Response

Details how button presses are registered and the system's reaction time.

System Calibration Procedures

Initial System Calibration Setup

Steps to begin system calibration, including control station and changeover settings.

Calibrating Actuator Positions

Calibrating throttle and gear actuator positions for various functions (idle, full, neutral, etc.).

Throttle Curve and Start Lock Settings

Setting throttle progression curves, gear-shifting delay, and the starting lock function.

Control Calibration Procedures

Control Calibration Steps

Step-by-step guide for calibrating individual control levers and checking the process.

Calibrating Gear and Throttle Positions

Adjusting forward, reverse, and neutral gear positions, plus full throttle settings.

Function Testing Procedures

Post-Installation Operational Tests

Procedures for testing system functions like throttle engagement and station changeover.

Testing Throttle Progression and Delay

Testing custom throttle curves and gear-shifting throttle delay settings.

Troubleshooting and Error Code Diagnostics

Error Code Reference List

Comprehensive list of error codes and their explanations for system diagnostics.

Diagnosing Common System Issues

Guidance on resolving common problems like system errors, failures, and actuator jams.

Electronic Control System Maintenance

Routine Maintenance Checks and Lubrication

Recommended checks for cables, electrical connections, actuators, and circuit breakers.

Installation Procedures Overview

Mechanical Installation Steps

Covers mounting controls, drive unit placement, and fitting mechanical cables.

Electrical Installation Steps

Guidance on wiring, battery connections, ignition, and relays for system installation.

Wiring Diagrams for Engine Setups

Illustrates electrical connections for single and twin engine installations.

CE Compliance and Standards

Electromagnetic Compatibility (EMC) Standards

Lists the CE standards and directives the electronic control system adheres to.