Need help?Do you have a question about the Volvo Penta EVC EC -C and is the answer not in the manual?
General| Compatibility | Volvo Penta engines |
|---|---|
| Functionality | Engine monitoring, control, and diagnostics |
| Features | Cruise control |
| Interface | CAN bus |
| Software | Volvo Penta EVC software |
Description of the distributed EVC-C system with nodes and CAN bus.
Powertrain and Helm station control units are central to the EVC system.
Various control levers, panels, displays, and key switches for helm stations.
Displays, gauges, multisensors, and senders for monitoring.
Guidelines for locating and mounting the Powertrain and Helm control units.
Installation of fuel/water senders and rudder indicators.
Connecting tachometers, instruments, displays, and auxiliary cables.
Covers auto-configuration, menu navigation, and display/tachometer setup.
Step-by-step calibration for control levers and powertrim functions.
Adjusting idling speed, fuel tank, multisensor, trolling, and slip settings.
How faults are displayed, indicated, and acknowledged.
Specific faults, their causes, reactions, and recommended actions.
Activating panels, starting the engine, and overheating protection.
Detailed wiring diagrams for specific engine and drive configurations.
Wiring diagrams for a broader range of engines and reverse gears.
To Next Page