Sound Parameters – Envelopes Section
111 Waldorf microQ User´s Manual
One Shot Envelope
The One Shot envelope type is designed for percussive sounds that don’t need a stage maintained as
long as a note is played. In other words: the envelope goes through all its stages, no matter how long
a key is pressed. This includes even the Attack phase. It uses the parameter set of the ADSR envelope
type in which the Sustain parameter is used to set a level breakpoint. This allows creation of One
Shot envelopes with a very percussive attack or with a “Gate” effect. Some parameters of the
Envelope section have no function so they can not be edited.
Attack Decay
Sustain
Release
Key pressed or hit shortly
Time
Level
100%
Picture 33: One Shot Envelope
Attack 0…127
Determines the attack rate or amount of time it takes for a signal to go from zero to maximum level.
Decay 0…127
Determines the decay rate or amount of time it takes for a signal to reach the Sustain level.
Sustain 0…127
Sets a breakpoint level between the Decay and the Release rate.
Release 0…127
The Release phase fades the envelope to zero after the Sustain level is reached.
To Next Page
Loading...
Need help?
General
