Global Parameters – Global Menu
135 Waldorf microQ User´s Manual
4. Turn the left display dial clockwise until you can read the display. Now the display
should work as usual. If not, turn the Page Dial counterclockwise for a short while and
repeat the procedure from step 3.
Operating System (OS) page
Software: 2.18
Hardware: 110
This menu page shows the latest Operating system (SW) and the hardware version (HW) of your
microQ. For more information about updating your microQ please read "Updating the System
software" on page 132.
Board/Serial Number page
Board#:0118
Prod.#:031005001
This menu page shows you the Board and Serial number of your microQ.
Upgrade-Code (only microQ lite)
Code for MQ upgrade:
1111-1111-1111-1111
On this menu page the upgrade code for the microQ lite can be found. It is used when making an
upgrade to a fullrange microQ. For more information about prices and handling please refer to our
website: http://www.waldorf-music.com
On the menu pages that follow you will find other important information. Please read and
follow these instructions.
To Next Page
Loading...
Need help?
General
