Waldorf microQ Keyboard User Manual

Sound Parameters – Oscillator Section
67 Waldorf microQ User´s Manual
Rate 0…127
Determines the glide time. Low values will give a short glide time in a range of milliseconds that gives
a special character to the sound. High values will result in a long glide time of up to several seconds
which can be useful for solo and effect sounds.
Suboscillator
01Sub Vol!Frq.divide
127 | 24
The parameters for the Suboscillator settings are only available when Alt1 or Alt2 are chosen as
Waveform. Therefore Oscillator 3 cannot create a Suboscillator. SubVol determines the volume of
the Suboscillator creating a Square Waveform. A setting of 0 corresponds to no volume. Please note
that the loudness of the Suboscillator also depends on the volume of the main oscillator. Frq.divide
determines the relative proportion of Sub- and Main oscillator frequencies. Higher values represent a
lower tuning.
 When Alt-Waveforms are selected for the first two oscillators and the Suboscillators are
activated, the microQ can create up to 5 (!) oscillators per voice.

Waldorf microQ Keyboard Specifications

General

Brand	Waldorf
Model	microQ Keyboard
Category	Synthesizer
Language	English