Sound Parameters – Mixer/Routing Section
71 Waldorf microQ User´s Manual
RingMod Balance F1 64…mid…F2 63
Determines the ratio of the ring modulator’s signal that is sent to the inputs of Filter 1 and/or Filter 2. If
set to F1 64, the signal is sent to Filter 1 only. Higher values will increase the amount of signal that
feeds Filter 2 and decrease the amount of signal that feeds Filter 1. If set to mid, both filters will
receive the same signal level. If set to F2 63, the signal is sent to Filter 2 only.