890557_d•en•01.07.2014 We reserve the right to carry out improvements
101
8.3 Current triggers
In this menu you see the current triggers of the channels created.
Push the [Measured value] function button in the start menu and then go to
the [All triggers] menu.
The following view appears in the display (the entries in the left column may
be different):
You can see a list of the channels that may also have freely selectable
names. At the right, the last, i.e. the current trigger is shown in each case.
This can be a manual move command or a comfort, safety or control func-
tion.
NOTE Move commands triggered via local operating elements are not shown!
Start menu
Measured values
All triggers
"Channel name"
Trigger
To Next Page
Loading...
